Wood is a product group that is both modern, natural and aesthetic with its constantly renewed models from the past to the present. Wooden floor coverings are floor covering products that can be used easily in many places. These floor covering products have different product groups for each space. These;
Laminate Flooring
Laminate flooring is a floor built around a waterproof, glued high-density fiber HDF (High Density Fiber Board) plate. This floor consists of four separate layers. The top layer is a transparent, abrasion and chemical resistant layer that we think of as lacquer. It consists of several layers of melamine in the press made under high heat and pressure applied to the HDF filling plate. The surface layer is covered with wood or a texture called “Registered Embossed”. A substrate is the layer on which the floor pattern is located. In this layer, there is a surface produced with real wood or advanced printing techniques and covered with melamine resin. The third layer is the thickest layer and consists of HDF filler plate. This plate consists of a wood-fiber mixture obtained from various parts of the tree. This layer, which has a very homogeneous structure, contains glue in its structure. It is highly resistant to moisture and heat. The support layer, which is the lowest layer, also has a structure with high resistance to moisture. When the assembly is carried out properly, superficial defects such as camber and slope do not occur.
Laminated flooring
Laminated parquet is a natural material consisting of 100% wood. The sheets are glued to each other at right angles, the surface is polished. Since the parts are produced as polished, scraper and polish application may be needed over time, although it is not required after the first laying. Due to its structure, it is a long-lasting and natural flooring choice. Each piece has special recesses and protrusions to match the other, making it easier to lay. In the place where it will be used, it can be laid with the method of sticking to the floor, or it is preferred to be laid with a floating system.
Due to the nature of the tree, it allows natural movements and thus cracking and opening that may occur due to temperature differences and seasonal changes are prevented.
Solid Flooring
Solid parquet, which is the most preferred flooring material, is a long-lasting, heat-resistant, sound-insulating material, and its quality can be maintained for many years with its 6 mm sistre. This material, which is produced with draft logs brought from the Far East and Africa, is made using hard and leafy woods such as maple, beech ash, teak, merbau, walnut, sapelli, doussie, iroko, wenge, bamboo and jatoba.
Bamboo Flooring
Bamboo flooring is seen as the best alternative to solid flooring. The bamboo plant, which is the raw material of these environmentally friendly parquets, is a material that grows easily and has abundant resources. Therefore, it is a natural and environmentally friendly structure. Bamboo parquets, which are easily applied and cost-effective, are polished with 6 layers of UV technology and are produced with non-toxic and water-based urethan glues and varnishes, thus providing insulation against moisture.
Unlike traditional parquets, it does not require sanding and polishing, provides minimum emission against dirt and dust, and is antibacterial. It does not burst or swell like laminated parquet in contact with water.
Recommended article, sport floor covering price click here to get detailed information about it.
Sports Flooring Parquets
A 2 mm polyethylene moisture barrier is laid on the existing concrete floor, 50 x 100 pine slats are laid on 19 mm rubber wedges with 25-30 cm axis spacing to absorb the impact, a single layer of 10-12 mm thick OSB or water contraption is placed on it. As a result, 20-22 mm thick solid or 14 mm thick hardwood with a ready-made polished surface, made of maple or oak trees, is fixed and polished by cross nailing method. Wooden skirting boards with 15-20 cm gaps are used to ensure the expansion of the system, that is, air circulation. This system is resistant to humid environments and is in the hardest wood category.
Outdoor Wood Flooring Features
Wooden floor coverings, due to the increase in ease of use, the warmer appearance, the stylishness and the increase in both color and texture options; In recent years, it has started to be preferred for many places.
Some tips on using wooden floors outdoors;
Wood flooring mist is a 100% natural product obtained from many different Far Eastern trees.
It is a product group suitable for pool sides and saunas as well as for the garden.
It absorbs water and prevents it from becoming slippery and is not adversely affected or damaged by water.
Wooden flooring is an easy and effortless flooring system.
It does not form splinters, and you can walk barefoot on it with peace of mind.
You can paint this flooring product any color you want.
It is a product that is highly resistant to both water and hard impacts and has a long service life.
It can be easily dismantled and mounted in another place.
It is a product that does not require frequent maintenance. Maintenance once a year will be sufficient.
Wooden flooring is an environmentally friendly product because it is natural.
They are flooring products that are resistant to all natural events.
You can use wooden flooring products not only as a floor system, but also as a decor tool.
Cleaning the wooden floor system is easy and effortless.
It is an advanced floor system product used during construction.
It is a product group that can be produced in the desired shape and size.
It does not need paint, but can be painted to the desired color if desired.
Flooring Systems 