It is an elastic and wear-resistant coating material.
Its raw material is hemp weaving coated with linseed oil and cork powder. The binder consists of a resin obtained from linseed oil. The filler is made of a very thin cork coating. Colorants can be added to the dough to obtain the desired color.
Linoleums containing cork give better results in terms of sound and noise insulation.
Linoleum Flooring Construction Stage
In order for the dough to polymerize, it must be laid on jute and canvas.
In cases where the linoleum needs to be made thicker, the filling is done on a plentiful substrate, using a wear layer.
Linoleum Flooring Usage Areas
Housing, office, hospital, classroom, kindergarten, public transportation vehicles, etc. It has many uses such as Generally, it is preferred for areas with heavy human traffic.
Method of Application
It is applied by laying on a dry and smooth surface. It can also be laid on the screed with the help of adhesive. Care should be taken to ensure that the coating does not fluctuate on the surface and should be applied by pressing. It can be used on top of it without any further processing; Optionally, polishing can be done with wax on plain or colored linoleum or with varnish on patterned linoleum.
It can be applied to wooden covered floors.
Before laying, it should be kept for at least 24 hours at approximately 18°C and in an upright position. This temperature should also be maintained during the application.
The humidity of the application area should be between 50-60%.
Packaging and storage conditions should be observed.
If an application is to be made on a floor with underfloor heating, the heating system must be turned off 48 hours before laying, and must remain off for at least 48 hours after the application is completed.
Properties
It is a light and easy-to-clean flooring that does not contain any harm to health.
It is usually produced with pvc floor covering price in rolls of 2 meters wide and 25-30 meters long. It can also be laid in tiles when necessary.
Cleaning and Maintenance
Vacuuming and wet-dry mopping can be done. If available, manufacturer’s recommended varnishes can be used. Excessive use of water should be avoided during cleaning, as it may absorb.
Flooring Systems 